My cart

0 item(s) - $0.00

  • Your shopping cart is empty!

Schneider LXM32MD72N4 Motion servo drive
Schneider LXM32MD72N4 Motion servo drive
Schneider LXM32MD72N4 Motion servo drive

Schneider LXM32MD72N4 Motion servo drive

0 reviews 0 sold. Only 10 remain
Brand:
Product Code: LXM32MD72N4
Availability: 10
Viewed 997 times

Product Description

Schneider LXM32MD72N4 Motion servo drive - Lexium 32 - three-phase supply voltage 208/480V - 7 kW

Main
range of product
Lexium 32
product or component type
Motion servo drive
device short name
LXM32M
format of the drive
Book
network number of phases
Three phase
[Us] rated supply voltage
200...240 V (- 15...10 %)
380...480 V (- 15...10 %)
supply voltage limits
170...264 V
323...528 V
supply frequency
50/60 Hz (- 5...5 %)
network frequency
47.5...63 Hz
EMC filter
Integrated
continuous output current
24 A (f = 8 kHz)
output current 3s peak
72 A for 5 s
maximum continuous power
6500 W at 230 V
nominal power
5 kW at 230 V (f = 8 kHz)
line current
14.6 A, THDI of 129 % at 480 V, without line choke
23.5 A, THDI of 43 % at 380 V, with external line choke of 1 mH
19.5 A, THDI of 55 % at 480 V, with external line choke of 1 mH
Complementary
switching frequency
8 kHz
overvoltage category
III
leakage current
<= 30 mA
output voltage
<= power supply voltage
electrical isolation
Between power and control
type of cable
Single-strand IEC cable (for θ = 50 °C) conductor material: copper 90 °C ,wire insulation material: XLPE/EPR
electrical connection
Terminal cable 3 mm² AWG 12 (CN8)
tightening torque
0.5 N.m (CN8)
discrete input number
2 capture
discrete input type
Capture (CAP)
sampling duration
0.25 ms
discrete input voltage
24 V DC for capture
discrete input logic
Positive (compliment of STO_A, compliment of STO_B) at State 0: < 5 V at State 1: > 15 V conforming to EN/IEC 61131-2 type 1
response time
<= 5 ms (compliment of STO_A, compliment of STO_B)
discrete output number
3
discrete output type
Logic (DO) 24 V DC
discrete output voltage
<= 30 V DC
discrete output logic
Positive or negative (DO) conforming to EN/IEC 61131-2
contact bounce time
<= 1 ms (compliment of STO_A, compliment of STO_B)
braking current
50 mA
response time on output
250 µs (DO) discrete
control signal type
Pulse train output (PTO) RS422 <= 500 kHz <= 100 m
protection type
Against reverse polarity :inputs signal
safety function
STO (safe torque off), integrated
safety level
SIL 3 conforming to EN/IEC 61508
communication interface
Integrated Modbus
connector type
RJ45 (labelled CN7) :Modbus
commissioning port
2-wire RS485 multidrop Modbus
transmission rate
9600, 19200, 38400 bps for bus length of 40 m Modbus
number of addresses
Modbus
status LED
1 LED (red) servo drive voltage
signalling function
Display of faults in 7 segments
marking
CE
operating position
Vertical +/- 10 degree
product compatibility
Servo motor BMH (140 mm, 2 motor stacks)
width
108 mm
height
270 mm
depth
237 mm
product weight
4.8 kg

Environment
electromagnetic compatibility
Conducted EMC at class A group 1 conforming to EN 55011
standards
EN/IEC 61800-3
product certifications
CSA
IP degree of protection
IP20 conforming to EN/IEC 60529
vibration resistance
1 gn (f = 13...150 Hz) conforming to EN/IEC 60068-2-6
shock resistance
15 gn for 11 ms conforming to EN/IEC 60028-2-27
pollution degree
2 conforming to EN/IEC 61800-5-1
environmental characteristic
Classes 3C1 conforming to IEC 60721-3-3
relative humidity
Class 3K3 (5 to 85 %) without condensation conforming to IEC 60721-3-3
ambient air temperature for operation
0...50 °C conforming to UL
ambient air temperature for storage
-25...70 °C
type of cooling
Integrated fan
operating altitude
<= 1000 m without derating

Write a review

Please login or register to review
Schneider LXM32MD72N4 Motion servo drive

Schneider LXM32MD72N4 Motion servo drive