Schneider BMH0701T27F2A Servo motor

0 reviews 0 sold. Only 10 remain

Brand: Schneider

Product Code: BMH0701T27F2A

Availability: 10

Viewed 1416 times

Qty

Tags: BMH0701T27F2A

Schneider BMH0701T27F2A Servo motor BMH - 1.4 Nm - 8000 rpm - untapped shaft - with brake - IP65/IP67

Main
product or component type	Servo motor
device short name	BMH
maximum mechanical speed	8000 rpm
continuous stall torque	1.4 N.m for LXM32.D18M2 6 A at 115 V single phase 1.4 N.m for LXM32.U90M2 3 A at 230 V single phase
peak stall torque	4.2 N.m for LXM32.D18M2 6 A at 115 V single phase 4 N.m for LXM32.U90M2 3 A at 230 V single phase
nominal output power	450 W for LXM32.U90M2 3 A at 230 V single phase 350 W for LXM32.D18M2 6 A at 115 V single phase
nominal torque	1.35 N.m for LXM32.D18M2 6 A at 115 V single phase 1.1 N.m for LXM32.U90M2 3 A at 230 V single phase
nominal speed	2500 rpm for LXM32.D18M2 6 A at 115 V single phase 4000 rpm for LXM32.U90M2 3 A at 230 V single phase
product compatibility	LXM32.U90M2 at 230 V single phase LXM32.D18M2 at 115 V single phase
shaft end	Smooth shaft
IP degree of protection	IP65 (standard) IP67 (with IP67 kit)
speed feedback resolution	32768 points/turn x 4096 turns
holding brake	With
mounting support	International standard flange
electrical connection	Rotatable right-angled connectors

Complementary
range compatibility	Lexium 32
[Us] rated supply voltage	240 V
network number of phases	Three phase
continuous stall current	2.85 A
continuous power	1.05 W
maximum current Irms	9.6 A for LXM32.D18M2 9.6 A for LXM32.U90M2
maximum permanent current	9.56 A
second shaft	Without second shaft end
shaft diameter	11 mm
shaft length	23 mm
feedback type	Multiturn SinCos Hiperface
holding torque	3 N.m (holding brake)
motor flange size	70 mm
number of motor stacks	1
torque constant	0.49 N.m/A at 120 °C
back emf constant	31.17 V/krpm at 120 °C
number of motor poles	10
rotor inertia	0.7 kg.cm²
stator resistance	3.2 Ohm at 20 °C
stator inductance	9.1 mH at 20 °C
stator electrical time constant	2.8 ms at 20 °C
maximum radial force Fr	360 N at 6000 rpm 380 N at 5000 rpm 410 N at 4000 rpm 460 N at 3000 rpm 520 N at 2000 rpm 660 N at 1000 rpm
maximum axial force Fa	0.2 x Fr
brake pull-in power	7 W
type of cooling	Natural convection
length	161 mm
centring collar diameter	60 mm
centring collar depth	2.5 mm
number of mounting holes	4
mounting holes diameter	5.5 mm
circle diameter of the mounting holes	82 mm
product weight	2.6 kg