Sidebar
			
		
		 
				
						
        	
						
				
						 
				
														
					
									
				 	
				
						
					
												
				
				
					
			
						
		
						
			
		
				
			
										
		    
				
																									 					
					
						
																						
							
							
								
									
									
						            
										
	
	
	
										
																		
																	
								
					            					            
						            
					            
					            
					            
																
																
							
						
					
				
				
								
				
			
						
		
    
              Schneider ABL8MEM24012 Regulated SMPS - 1 or 2-phase - 100..240 V AC - 24 V - 1.2 A
						Viewed  1754 times
					
										
				Product Description
Schneider ABL8MEM24012 Regulated SMPS - 1 or 2-phase - 100..240 V AC - 24 V - 1.2 A
| range of product | 
				Phaseo | |
|---|---|---|
| product or component type | 
				Power supply | |
| power supply type | 
				Regulated switch mode | |
| input voltage | 
				100...240 V AC phase to phase, terminal(s): L1-L2 100...240 V AC single phase, terminal(s): N-L1 120...250 V DC | |
| output voltage | 
				24 V DC | |
| rated power in W | 
				30 W | |
| input protection type | 
				Integrated fuse (not interchangeable) | |
| power supply output current | 
				1.2 A | |
| output protection type | 
				Against short-circuits | |
| ambient air temperature for operation | 
				-25...55 °C without 55...70 °C with | 
| input voltage limits | 
				85...264 V | |
|---|---|---|
| network frequency | 
				47...63 Hz | |
| inrush current | 
				20 A | |
| cos phi | 
				0.5 | |
| efficiency | 
				82 % | |
| output voltage limits | 
				22.2...28.8 V adjustable | |
| power dissipation in W | 
				6.6 W | |
| current consumption | 
				0.4 A at 240 V 0.65 A at 100 V | |
| line and load regulation | 
				+/- 3 % | |
| residual ripple | 
				250 mV | |
| holding time | 
				>= 10 ms at 100 V >= 150 ms at 230 V | |
| connections - terminals | 
				Screw type terminals for input connection, connection capacity: 
				2 x 0.14...2 x 2.5 mm² AWG 26...AWG 14 Screw type terminals for output connection, connection capacity: 4 x 0.14...4 x 2.5 mm² AWG 26...AWG 14 | |
| marking | 
				CE | |
| mounting support | 
				35 x 15 mm symmetrical DIN rail Panel 2 screws, diameter : 4 mm 35 x 7.5 mm symmetrical DIN rail | |
| operating position | 
				Vertical | |
| operating altitude | 
				2000 m | |
| output coupling | 
				Parallel Series | |
| name of test | 
				Harmonic current emission conforming to EN/IEC 61000-3-2 Conducted emissions on the power line conforming to EN 55022 Class B Electrostatic discharges conforming to EN/IEC 61000-4-2 Emission conforming to EN 50081-1 Induced electromagnetic field conforming to EN/IEC 61000-4-6 Primary outage conforming to IEC 61000-4-11 Radiated electromagnetic field conforming to EN/IEC 61000-4-3 Radiated emissions conforming to EN 55022 Class B Rapid transient conforming to IEC 61000-4-4 Surge conforming to EN/IEC 61000-4-5 | |
| status LED | 
				1 LED green for output voltage | |
| depth | 
				59 mm | |
| height | 
				100 mm | |
| width | 
				54 mm | |
| product weight | 
				0.195 kg | 
| product certifications | 
				TUV 60950-1 CCSAus CSA 22-2 No 950 RCM KC CULus 508 EAC | |
|---|---|---|
| standards | 
				CSA C22.2 No 60950-1 UL 508 | |
| environmental characteristic | 
				EMC conforming to EN 55022 Class B EMC conforming to EN 61000-6-3 EMC conforming to EN/IEC 61000-6-2 EMC conforming to EN/IEC 61204-3 Safety conforming to EN/IEC 60950-1 Safety conforming to SELV | |
| IP degree of protection | 
				IP20 conforming to EN/IEC 60529 | |
| ambient air temperature for storage | 
				-40...70 °C | |
| relative humidity | 
				0...90 % during operation 0...95 % in storage | |
| overvoltage category | 
				Class II conforming to VDE 0106-1 | |
| dielectric strength | 
				Between input and output | |
| MTBF reliability | 
				406032 H with MIL-HDBK-217F calculation method | 

